How to Remove a Sink Stopper? (It’s So Easy!)

This article will walk you through the simple steps necessary to safely and effectively remove a sink stopper. With the right tools and technique, removing a sink stopper is an easy job that anyone can do. Read on to learn how to remove a sink stopper.

First, you’ll need to gather the necessary tools and materials. You’ll need a pair of pliers, a flathead screwdriver, and some penetrating oil or lubricant. Make sure that all the necessary items are within reach before starting the job.

Gather the Necessary Tools :

Adjustable wrench, screwdriver, pliers, and a bucket. Remove any excess water from the sink. Place the bucket underneath the drain to catch any wastewater. Most sink stoppers have an adjustable screw located at the base of the stopper rod. Use your screwdriver or wrench to loosen this screw, then remove it completely. This will allow you to pull out the stopper rod.

If the adjustments screw is not present, use your pliers to remove the nut that secures the stopper in place. Some nuts may require a large amount of force, so it is important to be careful during this process. Once you have removed the stopper rod and nut, you should be able to lift out the stopper itself. Inspect the parts for any damage and set them aside. Clean out any debris or buildup from inside the sink before reassembling your new sink stopper. Reinstall the stopper rod, nut, and adjustments screw in their original locations, then check to make sure they are securely fastened.

Locate the sink stopper and examine its parts :

A plug, a pivot rod, and a lift lever. To remove it, start by lifting the lift lever to disengage the plug from the sink drain. This will reveal the pivot rod connected to the back of the stopper. Loosen and remove any nuts or screws attaching it to the drainpipe underneath. Once done, you can carefully pull out the entire assembly. Be sure to have an appropriate container handy to collect any water that comes out. With the stopper removed, you can now clear any debris from the drain hole and install a new sink stopper if desired.

To reinstall the sink stopper, begin by aligning the pivot rod with the mounting holes in the drainpipe. Secure it with nuts or screws as before, and make sure to tighten them firmly to prevent leaks. Put the stopper back in place by matching up the plugs to the drain hole and pressing down on the lift lever until it clicks into place. You may need some plumber’s putty around the edges of the plug for a better seal. Finally, double check all connections for any possible leaks before using your sink again.

How the sink stopper is attached to the sink drain ?

This is the first step in removing a sink stopper. If it is attached with a metal or plastic screw that may be visible, unscrew it to remove the stopper. If there are no visible screws, look for two small holes on either side of the drain and insert a flathead screwdriver into one of them and use it to turn the stopper. If there are no holes, the stopper is likely attached with a lift and turn mechanism that will require you to grab the top of the stopper and pull up on it while twisting it counterclockwise until it releases from the drain. Once you have successfully detached the sink stopper from the drain, you can then proceed to disassemble it and clean it as needed. It is important to note that you should never use harsh chemicals to clean the stopper, as they may damage the material or corrode it.

More related post : How to Remove Drain Stopper From Sink?

Clean out any debris from inside the drain before putting in a new stopper:

To begin, you’ll need to remove the old stopper. You can do this by grabbing onto the knob at the top of the stopper and turning it counterclockwise until it is loose enough to be pulled up. Make sure that you have a secure grip as you pull the stopper out. After you’ve removed it, you can take the time to clear out any debris that may have built up inside the drain. Use a damp cloth or sponge to wipe away any dirt and other materials that are clogging the drain. Once this is done, you can replace the old stopper with a new one.


Q. What are the different types of sink stoppers?

A: The most common types of sink stoppers include push-and-pull stoppers, pop-up stoppers, and lift-and-turn stoppers.

Q. How to remove a sink stopper that is stuck?

A: If your sink stopper is stuck, you can try to use WD-40 to lubricate the area and then remove it. If that does not work, you can try using a flat-head screwdriver to pry it off.

Q. How to change a sink stopper?

A: To change a sink stopper, you will first need to remove the old one. Once it has been removed, you can then install the new stopper. Make sure that the stopper is seated properly and securely with a gasket in place before you tighten it down.

Q. How to fix a sink stopper that won’t come up?

A: If your sink stopper won’t come up, it could be due to an obstruction such as debris or a broken part. You may need to disassemble the stopper and clean out any debris or replace a part that is broken.

Q. How to fix a sink stopper?

A: To fix a sink stopper, you need to identify the issue and then determine what parts may need to be replaced. Depending on the type of stopper, you may need to replace the rubber seal, pivot rod, or a linkage.

Q. How can I prevent my sink stopper from getting dirty?

A: To prevent your sink stopper from getting dirty, make sure to clean it regularly. You can also use a rubber stopper cover to protect it from dirt and grime. Additionally, you should make sure that the stopper is properly sealed to prevent water leakage.

Q. What are some common problems with sink stoppers?

A: Common problems with sink stoppers include leakage, difficulty opening and closing, and becoming stuck. If you experience any of these issues, make sure to check that the stopper is properly installed and functioning correctly.


Removing a sink stopper is a simple task that can be done with minimal effort and only requires a few household tools. Once the stopper has been removed, it can then be inspected for any damage or debris and thoroughly cleaned before being replaced. With proper care and attention, your sink and its components will remain in top condition for years to come.



Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top